In this report we’re going to examine how to make your own dog mask. We’ll cover the basics and then go on to take a look at a number of the more advanced tips and techniques that you can use.

For those who have a dog that likes to bark, and particularly if your dog loves to play in the backyard and other regions of the home, you need to get them some particular dog protection.

Paper Plate 3d Dog Mask DIY Materials: This is the first part of the setup that will look a little scary at first, but it’s actually quite simple. All you have to do is take a cardboard cutting board and cut the cardboard into the shape of your mask. You can not simply cut a rectangular shape from the cardboard, so you’ll need to cut around the edge of the mask so that you get something which looks like a cone. The main thing here is to be realistic with what type of paper plate which you’re using.

Then you’ll have to wrap the cardboard around the edges of the paper plate, making certain there is a good seal between the two pieces so you can make certain that nothing will leak when you put the mask on. Be sure that the edges are cut so the edges are not sharp, as this may damage the edges of the mask.

Glue it on! The next step involves using some paint. You ought to spray the paint over the cardboard, making certain it runs smoothly and evenly across the entire mask. You’ll want to start with one side of the mask , so mask for dog you can work your way around it before moving onto the other side. The paint has to be slightly thicker than the cardboard, and it’s best that you leave about one-fifth of an inch of paint on the edges so that it runs over the cardboard.

Don’t fret too much about the paint getting stuck into your mask. It’s easy to remove it later, and it will leave you with a nice finished mask to show off to everyone! It’s also a good idea to wipe away any excess paint once you’re done, so you don’t end up with smudges or smears on your dog.

Then it is time to paste the mask on your dog’s head. First you need to be certain that you have a secure fit between the mask and your dog’s head. As soon as you’ve made sure that it’s secure, then you can begin to glue the mask on the dog’s face. Take the piece of cardboard that is used for the base of the mask and fold it over. Be sure that it’s quite powerful and then use your hands to ensure the cardboard down in place.

Keep your hands out of the way and use tape to hold it in place as you repeat the process on the cardboard folds till you’ve got the mask snugged firmly onto the surface of your dog. Don’t make the folds too large or else it could look messy. Once you’ve done this, you can then take out the mask and attach the cardboard ears. And attach the other area of the mask onto the dog. Be sure the ears are level and be certain it’s not too short or long as this will cause some problems with the mask slipping off the dog’s face.

If you are using a dog mask as your dog protection, you will need to do some sanding to be sure that it’s safe on your dog. You can do it by sanding off any excess paper that may have been eliminated from your mask.